Mindray BeneView T8, Operation Manual

Page: 136 / 290

Monitoring Carbon Dioxide
13-6
13.4 Changing CO
2
Settings
13.4.1 Accessing CO
2
Menus
„ By selecting the CO
2
parameter window, you can access the [
CO2 Setup
] menu.
„ By selecting the CO
2
waveform, you can access the [
CO2 Waveform
] menu.
13.4.2 Changing the Operating Mode
For sidestream or microstream CO
2
modules, the default operating mode is standby when the
monitor is switched on. You can start the CO
2
module by selecting the hardkey, or the
CO
2
parameter window → [
Operating Mode
] → [
Measure
]. When the monitor restarts, the
CO
2
module automatically continues with the previously chosen operating mode.
During standby, the CO
2
gas sample intake pump, infrared light, etc. are automatically
switched off to extend the lifetime of the CO
2
module.
13.4.3 Setting the Pressure Unit
In the [
CO2 Setup
] menu, select [
Press. Unit
] and toggle between [
mmHg
], [
%
] and [
kPa
].