Mindray BeneView T8, Operation Manual

Page: 69 / 290

Alarms
6-5
6.4 Alarm Tone Configuration
6.4.1 Changing the Alarm Volume
1. Select the [
Alarm Setup
] QuickKey, or [
Main Menu
]
→
[
Alarm Setup >>
].
2. Select [
Alarm Volume
] and then select the appropriate volume. 1 is minimum volume,
and 10 the maximum volume.
6.4.2 Switching the Alarm Sound On/Off
1. Select [
Main Menu
] → [
Maintenance >>
] → [
User Maintenance >>
] → enter the
required password.
2. Select [
Alarm Setup >>
] to enter the [
Alarm Setup
] menu.
3. Select [
Alarm Sound
] and toggle between [
On
] and [
Off
].
6.4.3 Setting the Interval between Alarm Sounds
1. Select [
Main Menu
]
→
[
Maintenance >>
]
→
[
User Maintenance >>
]
→
enter the
required password.
2. Select [
Alarm Setup >>
] to enter the [
Alarm Setup
] menu.
3. Select [
High Alarm Interval (s)
], [
Med Alarm Interval (s)
] and [
Low Alarm Interval
(s)
] in turn and then select the appropriate settings.
WARNING
z
When the alarm sound is switched off, the patient monitor will give no audible
alarm tones even if a new alarm occurs. Therefore the user should be very careful
about whether to switch off the alarm sound or not.
z
Do not rely exclusively on the audible alarm system for patient monitoring.
Adjustment of alarm volume to a low level may result in a hazard to the patient.
Always keep the patient under close surveillance.