Mindray BeneView T8, Operation Manual

Page: 71 / 290

Alarms
6-7
6.5.4 Recording Alarms Automatically
When a measurement alarm occurs, automatic recording of all the measurement numerics and
related waveforms is possible when the measurement’s [
Alarm
] and [
Alm Rec
] are set on.
To switch automatic start of alarm recording on or off for individual measurements, you can
either:
1. In the setup menu for your desired measurement, select [
Alm Rec
] and toggle between
[
On
] and [
Off
], or
2. Select [
Main Menu
] → [
Alarm Setup >>
] → [
Alarm Recordings >>
]. In the [
Alarm
Recordings
] menu, select your desired measurement and toggle between [
On
] and
[
Off
].
Additionally, you can change the length of the recorded waveforms. In the
[
Alarm Setup
]
menu, select [
Recording Length
] and toggle between [
8 s
], [
16 s
] and [
32 s
]:
„ [
8 s
]: 4 seconds respectively before and after the alarm trigger moment.
„ [
16 s
]: 8 seconds respectively before and after the alarm trigger moment.
„ [
32 s
]: 16 seconds respectively before and after the alarm trigger moment.