Mindray BeneView T8, Operation Manual

Page: 181 / 290

Review
19-7
19.5 Reviewing Alarms
When a measurement alarm occurs, all relative measurement numerics at the alarm trigger
time and related waveforms 2, 4 or 8 seconds respectively before and after the alarm trigger
time are stored. To review the stored alarms, select [
Review
] → [
Alarms
] to access the
following window.
1. Event list 2. Waveform area 3. Parameter area
In this review window:
„ You can set a time as the index for finding your desired alarm event. There are up to 100
alarm events stored in the database. If you set a time that is too early, the earliest alarm
event will be recalled. If you set a time that is too late, the last alarm event will be
recalled.
„ You can view the desired measurement alarms by selecting [
Event
] and then selecting
the measurement whose alarms you want to view. [
All
] includes all measurements.
„ To select an alarm event for viewing, you can either:
‹ Select the or button, or
‹
Directly select your desired alarm event on the screen.
„ As soon as an alarm event is selected, its measurement numerics and related waveforms
are displayed respectively in the parameter and waveform area.
„ You can select or to navigate through the waveforms.
1
2
3