Multisymbol
7-4
MS-860 Industrial Raster Reader User’s Manual
Multisymbol
Number of Symbols
Usage:
Commonly used in shipping applications where a shipping symbol con-
tains individual bar codes for part number, quantity, etc. This feature
allows one trigger to pick up all the symbols. AIAG and UCC/EAN-128 are
two application standards that address this need.
Definition:
Allows the user to set up conditions that will allow more than one symbol
to be decoded and output.
Conditions
The following conditions apply:
1. All noread messages are posted at the end of the data string.
2. If more than one symbol is within the scan beam at the same time,
symbol data may not be displayed in the order of appearance.
3. If
Matchcode Type is set to Sequential or if Trigger is set to
Continuous Read 1 Output, Number of Symbols will default to
1 (if set to any number greater than 1).
4. The maximum number of characters in any one linear symbol is
128
.
5. The maximum number of output characters for all symbols is
3072
,
including separators, and optimal formatting.
Usage:
Commonly used where a shipping symbol contains individual symbols for
part number, quantity, etc. UCC/EAN-128 is an example of a symbology
that address this need.
Definition:
Number of Symbols allows the user to define up to 12 bar code sym-
bols that can be read in a single read cycle.
Conditions:
The following conditions apply:
1. When
Number of Symbols is set to Single, the read cycle ends
when one symbol is decoded and output.
2. When
Number of Symbols is set to Multiple, all decoded symbol
data (for both the same and different symbols) are output while the
read cycle is active and/or no timeout has occurred.
Serial Cmd:
<
K222,number of symbols
,multisymbol separator>
Default:
1
Options
1 to 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com