1D Symbologies
9-16
MS-860 Industrial Raster Reader User’s Manual
Important:
• When setting
Symbol Length to any number other than zero, add
2
to account for
reserved spaces. For example, if your symbol has
3
characters, set
Symbol Length
to
5
.
• If
Symbol Length is set to zero (
0
) and
Symbol Length Status is set to
Any/
Minimum
, all symbol lengths are decoded.
Note: Fixed Symbol Length Status must be enabled for Symbol Length to take effect.
Note: Because of symbology limitations, setting Symbol Length to any number less
than four will produce undetermined results.
Check Digit Type
Check Digit Output Status
Usage:
Modulus 16 is used in the photo-finishing market.NW7 is used in Japa-
nese markets.
Definition:
Allows the user to select the check digit type
Codabar will use.
Serial Cmd:
<
K471,
status,start & stop match,start & stop output status,large inter-
character gap,fixed symbol length status,fixed symbol length,
check
digit type
,check digit output status>
Default:
Disabled
Options:
0 = Disabled
1 = Modulus 16
2 = NW 7
3 = Both
Usage:
For additional security a check digit can be added to the symbol.
Definition:
When enabled, the check digit character is sent along with the symbol
data. When disabled, symbol data is sent without the check digit.
Serial Cmd:
<
K471,
status,start & stop match,start & stop output status,large inter-
character gap,fixed symbol length status,symbol length,check digit
type,
check digit output status
>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
