Communications
MS-860 Industrial Raster Reader User’s Manual
6-15
Daisy Chain ID Status
Note: Enable/disable and length must be the same in all readers.
Daisy Chain ID
Note: All secondary readers must be set to Serial for Daisy Chain to function.
See
"Trigger"
on page 7-6.
Usage:
Used in a daisy chain setup in cases where the host needs to know which
reader in a daisy chain setup sent the data.
Definition:
Each reader in a daisy chain can be assigned a one or two character ID
that will appear in front of decoded data and identify its source.
Serial Cmd:
<
K101,
aux port mode,baud rate,parity,stop bits,data bits,
daisy chain
ID status
,daisy chain ID>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Usage:
Used in a daisy chain setup in cases where the host needs to know which
reader sent the data.
Definition:
A one or two character prefix which identifies the particular daisy chain
reader from which the data is being sent.
Serial Cmd:
<
K101,
aux port mode,baud rate,parity,stop bits,data bits,daisy chain ID
status,
daisy chain ID
>
Default:
1/
Options:
Any one or two ASCII characters.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
