Symbologies
MS-860 Industrial Raster Reader User’s Manual
9-15
Large Intercharacter Gap
Fixed Symbol Length
Status
Symbol Length
Usage:
It
is helpful for reading symbols that are printed out of specification.
Caution: Do not use Large Intercharacter Gap with Narrow Margins
enabled since enabling
Large Intercharacter Gap (over 3x) could
cause a narrow margins (5x) to be interpreted as an intercharacter gap.
Definition:
Instructs the reader to read symbols with gaps between characters
exceeding three times the narrow element width.
Serial Cmd:
<
K471,
status,start & stop match status,start & stop output status,
large
intercharacter gap
,fixed symbol length status,symbol length,check
digit type,check digit output status>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Usage:
Helps prevent truncations and increases data integrity by ensuring that
only one symbol length will be accepted.
Definition:
When set to Enabled, the reader will check the symbol length against the
Fixed Symbol Length field.
Serial Cmd:
<
K471,
status,start & stop match status,start & stop output status,large
intercharacter gap,
fixed symbol length status
,symbol length,check
digit type,check digit output status>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Definition:
Specifies the exact number of characters that the reader will recognize
(this does not include start and stop and check digit characters). The
reader ignores any symbol not having the specified length.
Serial Cmd:
<
K471,
status,start & stop match status,start & stop output status,large
intercharacter gap,fixed symbol length status,
symbol length
,check digit
type,check digit output status>
Default:
10
Options:
1 to 128
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
