EZ Button Options
3-6
MS-860 Industrial Raster Reader User’s Manual
EZ Button Options
The EZ Button provides a convenient way to perform programmable operations both
globally and for each of the three programmable button positions.
The EZ Button has three positions, each of which can be user-programmed to perform a
variety of functions.
Global Status of EZ Button
Disabled
When selected, the EZ Button is disabled.
Enabled
When selected, the function of each button position can be determined by the
EZ But-
ton Mode
<K771>
command.
Trigger
When selected, the EZ Button will act as a trigger for the reader. All other button opera-
tions will not be active. The trigger will operate the same way as an external trigger.
Unlatch Output. When selected, will unlatch any outputs that have been latched via
"Latch Mode 1 (Unlatch on Input #1)"
on page 10-18.
Unlatch Outputs
Unlatch any outputs that have been latched via latch mode #1. See
<K81n>
com-
mands.
Definition:
Determines the basic function of the EZ Button.
Serial Cmd:
<
K770,global status
,default on power-on>
Default:
Enabled
Options:
0 = Disabled
1 = Enabled
2 = Trigger
3 = Unlatch Output
4 = Parameter Switch
Trigger mode
Operation
External Level
The read cycle endures for as long as the EZ Button is pressed, unless
a timeout occurs and
Timeout is enabled for End Of Read Cycle.
External Edge
As with
Level, Edge allows a read cycle to be initiated by pressing the
EZ Button, but unlike
Level mode, the read cycle ends with a good
read output, a timeout, or a new trigger.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
