Communications
MS-860 Industrial Raster Reader User’s Manual
6-17
Daisy Chain Remote Secondary ID
Note: Not in ESP.
Daisy Chain Reader Number
Daisy Chain Reader ID
Note: After a secondary reader accepts a new ID, it automatically invokes a reset-with-
save command.
Usage:
This command provides a handy way to assign custom daisy chain IDs to
specific readers that were assigned during the daisy chain autoconfigure
process.
Definition:
Assigns a new daisy chain ID to a daisy chain secondary reader. The com-
mand is sent to the master reader to configure the other secondary read-
ers.
Definition:
Specifies the target reader (by sequential number) which will be receiving
the new Daisy Chain ID. The master reader is always 0 (zero). All second-
ary readers are numbered 1...n in the order that they are connected.
Note: These numbers are for assigning IDs only and are not
changeable.
Serial Cmd:
<
K151,daisy chain reader #
,daisy chain reader ID>
Options:
1....n (0 for the master reader)
Definition:
A two-character user-defined ASCII message identifying a reader in the
daisy chain.
Serial Cmd:
<
K151,
daisy chain reader #,
daisy chain
reader ID
>
Default:
Sequential numbering of reader units resulting from the Daisy Chain
Auto-configure
<K150DAISY>
command; for example: ID Master =
1/
;
ID Reader 1 =
2/
; ID Reader 2 =
3/
; etc.
Options:
Any two characters except
NULL < ,
or
>
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com