EZ Button
MS-860 Industrial Raster Reader User’s Manual
3-3
EZ Button Operation
The MS-860 EZ Button provides a quick and easy way
to perform routine tasks such as Read Rate test and
Calibration.
Defaults
In the default positions the following operations occur:
• Single Beep and green flash:
Starts a
Read Rate
test
• Two Beeps and green flashes:
Starts a
Calibration
• Three Beeps and green flashes:
Save for Power-on
Using the EZ Button
The EZ Button has three positions, selectable by the
length of time that the button is held down as indi-
cated by one, two, and three beeps and percentage
LEDs in succession.
For example, for three beeps, press and hold the EZ
Button. You will first hear a single beep and see the
20% LED turn ON. Continue to hold and you will hear two quick beeps and see the 40%
LED turn ON. Do not release until you hear three quick beeps or see the 60% LED turn
ON.
Programmable Beeps
Each beep condition (1, 2 or 3) can be programmed for any of 8 options as presented in
"EZ Button Modes"
on page 3-4.
Programmable Options
The EZ Button can also be programmed for alternative operations including restore fac-
tory defaults as well as a quick save feature for calibration results. (See
"EZ Button
Options"
on page 3-6.)
EZ
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
