Bad Symbol Message
10-8
MS-860 Industrial Raster Reader User’s Manual
Bad Symbol Message
Note: Bad Symbol Message does not apply to multisymbol operations.
Note: AGC (page
7-19
) must be disabled when this feature is used.
Bad Symbol Status
Bad Symbol Message
Usage:
Useful in verifying the presence of a symbol that has not been decoded.
Definition:
When enabled, a message is sent to the host when a symbol is detected
but not decoded. See
"Transition Counter"
on page 7-21.
The
Bad Symbol output is tied to the transition counter. If during a read
cycle no symbol is decoded and the required setting for the
Transition
Sample Threshold is met, a user defined message will be sent to the
host.
Serial Cmd:
<
K715,bad symbol
status
,bad symbol message>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Serial Cmd:
<
K715,
bad symbol status,
bad symbol message
>
Default:
BAD_SYMBOL
Options:
Up to 128 ASCII characters (except NUL)
The
Bad Symbol output is tied to the transition counter. If during a read
cycle no symbol is decoded and the required setting for the
Transition
Sample Threshold is met, a user defined message will be sent to the
host.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com