Defaulting/Saving/Resetting
15-16
MS-860 Industrial Raster Reader User’s Manual
Defaulting/Saving/Resetting
Understanding and controlling your reader’s active, saved, and default settings is criti-
cal to the operation of your reader.
Important: The following commands need to be followed by a
<Z>
to be saved for
power-on:
Host Protocol, Baud Rate, Data Bits, Stop Bits, Parity, Trigger Characters
(
Delimited, Start, and Stop) Preamble, Postamble, and Noread Message.
All other parameters are saved for power-on without a
<Z>
. However, a
<Zrd>
affects
all parameters.
See
"Defaulting/Saving/Resetting"
on page A-16 for a complete explanation of
resets, saves and defaulting.
Software Reset/Save/Recall Commands
<A>
Reset (does not save for power-on)
<Ard>
Reset and recall factory defaults
<Arp>
Reset and recall power-on parameters
<Arc>
Reset and recall customer default parameters
<Z>
Save current settings for power-on
<Zc>
Save current settings as customer default parameters
<Zrd>
Recall factory defaults and save for power-on
<Zrc>
Recall customer default and save for power-on
<Zp>
Reset and save factory settings
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
