Connect the System
1-2
MS-860 Industrial Raster Reader User’s Manual
Step 1 — Connect the System
Caution: If using your own power supply (see
"Safety Labels"
on page ix), be certain
that it is wired correctly and supply voltage is 10 to 28 VDC. Incorrect wiring or voltage
can cause equipment failures.
To connect the system, do the following:
1. Connect the reader
(
1
) to the Host (
2
)
with the null modem
cable (
3
).
2. Connect the power
supply cable (
4
) to the
reader’s power con-
nector.
3. If used, connect the
object detector cable
(
5
) to the trigger con-
nector.
4. Apply power to the
system.
Hardware Required
5
1
2
4
3
When setting up the system, you will
need the following:
Item
a
a. See the illustration for diagram of system.
Part Number
Description
1
FIS-0860-1XXXG MS-860 Reader
2
N/A
Host computer
3
61-000034-02
Null modem configura-
tion cable
4
97-100004-15
(90-264
VAC,
24VDC)
US Power supply and
EU Power supply
5
99-000017-01 Object detector
Caution:
• Be sure all cables are connected
BEFORE applying power.
• Always power down
BEFORE disconnecting any cables.
2
1
3
1
2
3
4
25
1
Connectors on MS-860
Trigger
connector
Chassis
ground
2
3
Power
+10 to 28 VDC
Power
connector
25-pin host
connector
Power
ground
1
Note: Power connector pins are best identified by their relation-
ship to the notches on the outside edge of the connector.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
