Master Symbol Database
15-10
MS-860 Industrial Raster Reader User’s Manual
Enter Master Symbol Data
To enter master symbol data:
1.
Double-click
on each index
number you want to setup and
copy or type in your data in the
popup data entry box.
2. Click on the
Send Database to
Reader
button.
Note: You can also click
Receive
Reader’s Database
to enter the
reader’s current database settings.
Caution: Since the total number of
characters available for the master
symbol database is
128
, changes to
the
Number Of Master Symbols will re-allocate the number of characters available for
each master symbol and could cause existing master symbols to be deleted (except master
symbol #1 unless it also exceeds the size limitation).
The
"Maximum Characters for Master Symbol Database"
table on page 15-8 specifies
the maximum number of characters available to each symbol according to the number of
master symbols defined, from 1 through 10. See
"Number of Master Symbols"
on page
15-9.
Definition:
Allows you to enter master symbol data for a specific master symbol
index number (1 to 10), provided the index number is not larger than the
number of symbols enabled by the
Number Of Master Symbols (see
page
15-9
). For example, if
Number Of Master Symbols is set to 2,
you will not be able to enter data for symbols 3 through 10.
Serial Cmd:
<
K231,master symbol number,master symbol data
>
Default:
1, (blank)
Options:
1 to 10, any combination of ASCII text up to the maximum indicated in
"Maximum Characters for Master Symbol Database"
on page 15-8.
For example, to enter data for master symbol 9, after making certain that
Number Of Master Symbols is enabled for 9 or more symbols, send
<K231,9,data>
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
