background image

The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by Baracoda under license. The Baracoda names and Baracoda trademarks are
own by Baracoda. All specifi cation are subject to change without notice - Non contractual pictures © Baracoda - All rights reserved

Baracoda, Inc. (US Offi ce) 

Baracoda SA (Europe Offi ce: France)

45 Main street - Suite 616 - Brooklyn, NY 11201 

30 Avenue de l’Amiral Lemonnier - 78160 Marly-Le-Roi

Ph: 718 488 9600 - Fx: 718 488 9601 

Ph: +33 1 30 08 89 00 - Fx: +33 1 30 08 89 98

BC/BL/BLR 2604 

© B

aracoda™ - September 200

4

Important notice

Every effort is made to ensure the accuracy of 

our product information; however, we accept no 

responsability for errors or omissions including, but not 

limited to, the implied warranties of merchantability and 

fi tness for a particular purpose. We shall not be liable for 

errors contained herein or for incidental consequential 

damages in connection with the furnishing, performance, 

or use of this material.

Specifi cations or version may be subject to change 

without notice. The actual specifi cation and version are 

based on the product delivered.

Introduction

Scanning a series of programming bar code labels can 
confi gure the scanner.
The scanner must be properly powered before program-
ming.
During the programming mode, the scanner will ack-
nowledge a good and valid reading with a short beep. It 
will give long beeps for either an invalid or bad reading.

Programming Guide

Summary of Contents for BC2604
























Reviews: