Fig. 23: PLG Front Switch Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 24: PLG Front Switch - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the liftgate recess. (See
LIFTGATE LOWER TRIM REMOVAL/INSTALLATION
.)
3. Disconnect the connector from the PLG rear switch.
4. Remove the PLG rear switch from the recess.
5. Install in the reverse order of removal.
Fig. 25: Identifying PLG Rear Switch & Connector
Courtesy of MAZDA MOTORS CORP.
POWER LIFTGATE (PLG) REAR SWITCH INSPECTION
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Doors and Liftgate - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:45:23 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
