3. Remove in the order indicated in the table.
Fig. 4: Identifying Front Combination Light, Connector, Bolt & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
5. Adjust the headlight aiming. (See
HEADLIGHT AIMING
.)
HEADLIGHT AIMING
1. Adjust the tire pressure to the specification.
2. Position the unloaded vehicle on a flat, level surface.
3. Seat one person in the driver's seat.
4. Position the vehicle straight ahead and perpendicular to the white screen.
5. Set the headlights
3 m {9.8 ft}
from the white screen.
6. Place an object in front of the headlight not being adjusted to block its light beam.
7. Start the engine so that the battery remains charged.
8. Turn on the low-beam headlight.
9. Set the headlight leveling switch to the 0 position. (Vehicles with headlight leveling switch)
Fig. 5: Adjusting Headlight Aiming
Courtesy of MAZDA MOTORS CORP.
10. Adjust by turning the aiming adjustment screw so that elbow point is in the position shown in the figure.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:39:05 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
