Fig. 194: Identifying Snap Ring Of Transaxle Case
Courtesy of MAZDA MOTORS CORP.
2. Remove the low and reverse brake return spring from the transaxle case.
Fig. 195: Identifying Low And Reverse Brake Return Spring
Courtesy of MAZDA MOTORS CORP.
3. While pushing the low and reverse brake piston by hand, apply compressed air into the oil passage of the
transaxle case as shown in the figure and remove the low and reverse brake piston.
Air pressure
392 kPa {4.0 kgf/cm
2
, 57 psi}
CAUTION:
z
Do not damage the seal on the piston.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 105
© 2005 Mitchell Repair Information Company, LLC.
