5. Remove the rear drain hose from the clips.
Fig. 15: Identifying Rear Drain Hose Clips
6. Pull the rear drain hose into the room side.
7. Remove the rear drain hose.
REAR DRAIN HOSE INSTALLATION
1. Apply soapy water to the rear drain hose inserting area.
2. Insert one end (the wider side) of the rear drain hose into the sunroof frame.
3. Install the rear drain hose to the clips parallel to the pillar and free of slack.
4. Insert the rear drain hose joint into the rear pillar inner hole.
5. Install the following parts:
1. Headliner (See
HEADLINER REMOVAL/INSTALLATION
.)
2. RES unit cover (Vehicles with RES) (See
RES UNIT REMOVAL/INSTALLATION
.)
3. Assist handle (See
ASSIST HANDLE REMOVAL/INSTALLATION
.)
4. Sunvisor (See
SUNVISOR REMOVAL/INSTALLATION
.)
5. Front map light (See
FRONT MAP LIGHT REMOVAL/INSTALLATION
.)
CAUTION:
z
If the rear drain hose is pinched or bent anywhere, the water in the
hose may not discharge and enter the inside of the vehicle. During
and after installation of the trims and the headliner, always make sure
there is no interference with the rear drain hose. Fix any problem if
found.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Sunroof - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:38:25 AM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
