1. Remove the deployed air bag module or pre-tensioner seat belt.
2. Put the air bag module or pre-tensioner seat belt in a plastic bag, seal the bag, and then dispose of it.
Fig. 80: Placing Air Bag Module Or Pre-Tensioner Seat Belt In Plastic Bag
Courtesy of MAZDA MOTORS CORP.
INSPECTION OF SST (DEPLOYMENT TOOL)
1. Before using the
SST (49 H066 002), inspect its operation
.
form a gas that can make breathing difficult. Do not pour water on
the deployed air bag module and pre-tensioner seat belt.
z
The deployed air bag module or pre-tensioner seat belt may contain
deposits of sodium hydroxide, a caustic by product of the gas-
generated combustion. If this substance gets into your eyes or on
your hands, it can cause irritation and itching. When handling the
deployed air bag module and pre-tensioner seat belt, wear gloves
and safety glasses.
z
Due to the adoption of 2-step deployment control in both the driver
and passenger-side air bag modules, depending on the impact force,
it is possible that inflator No.2 might not operate (deploy). Before
disposing of the air bag module, always follow the inflator
deployment procedures and verify the complete operation
(deployment) of inflators No.1 and 2.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:16:38 AM
Page 51
© 2005 Mitchell Repair Information Company, LLC.
