Courtesy of MAZDA MOTORS CORP.
Assembly Procedure
1. Apply ATF to the new O-rings and the intermediate shaft.
2. Install the O-rings to the intermediate shaft.
Fig. 184: Identifying O-Rings Of Intermediate Shaft
Courtesy of MAZDA MOTORS CORP.
O-RING SIZE
3. Apply ATF to the sliding surface of the C2 clutch piston.
4. Install the C2 clutch piston to the intermediate shaft.
5. Apply ATF to the seal on the clutch balancer and sliding surface.
mm {in}
Inner diameter Thickness
Upper 51.90 {2.043} 1.60 {0.0630}
Lower 50.40 {1.984} 2.62 {0.1031}
CAUTION:
z
Do not damage the seal on the piston and O-ring.
CAUTION:
z
Do not damage the seal on the clutch balancer.
z
Do not damage the O-ring.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 98
© 2005 Mitchell Repair Information Company, LLC.
