Fig. 12: Identifying Topmost & Bottommost Positions Of Float & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
z
If they are not as indicated, replace the fuel gauge sender unit or fuel gauge sender sub-unit.
OIL PRESSURE SWITCH INSPECTION
1. Verify that the oil pressure warning light illuminates when the ignition switch is at the ON position.
2. Verify that the oil pressure warning light goes out when the engine is started.
z
If the oil pressure warning light does not illuminate or remains illuminated, inspect the BCM and
related wiring harness.
If the BCM and related wiring harness are normal, inspect the oil pressure. (See
OIL
PRESSURE INSPECTION [MZI-3.7]
.)
z
If the oil pressure is normal, replace the oil pressure switch.
HORN REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Slightly bend back the mudguard.
3. Remove in the order indicated in the table.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
