8. Mark the position on the floor where a right angle is formed by the lines which cross at the point
1,470
mm ± 8 mm {57.87 in ± 0.3 in}
from the vehicle rear and the point
1,790 mm ± 8 mm {70.47 in ± 0.8
in}
from the vehicle side which is perpendicular to the vehicle's center line.
Fig. 29: Identifying BSM Control Module Radius
Courtesy of MAZDA MOTORS CORP.
9. Set the SST (reflector) installation surface level using the bubble level built into the SST (tripod).
Fig. 30: Identifying SST (Reflector)
Fig. 28: Identifying Leveling Line Position
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 40
© 2005 Mitchell Repair Information Company, LLC.
