available?
No
Go to the next step.
3
INSPECT CRUISE CONTROL SWITCH
CONNECTOR FOR POOR
CONNECTION
z
Turn the ignition switch to off.
z
Disconnect the cruise control switch
connector.
z
Inspect for poor connection (such as
damaged/pulled-out pins, corrosion).
z
Are there any malfunction?
Yes
Repair or replace suspected part, then go to Step
9.
No
Go to the next step.
4
IINSPECT CRUISE CONTROL SWITCH
CIRCUIT FOR SHORT TO POWER
SUPPLY
z
Turn the ignition switch to the ON
position (Engine off).
z
Measure the voltage between the
following terminals:
{
Cruise control switch terminal B
and body ground
{
Cruise control switch terminal C
and body ground
z
Are there voltage B+?
Yes
Repair or replace suspected part, then go to Step
9.
No
Go to the next step.
5
INSPECT CRUISE CONTROL SWITCH
CIRCUIT FOR SHORT TO GROUND
z
Turn the ignition switch off.
z
Inspect for continuity between the
following terminals:
{
Cruise control switch terminal B
and body ground
{
Cruise control switch terminal C
and body ground
z
Are there continuity?
Yes
Repair or replace suspected part, then go to Step
9.
No
Go to the next step.
6
INSPECT PCM CONNECTOR FOR
POOR CONNECTION
z
Turn the ignition switch off.
z
Disconnect the PCM connector.
z
Inspect for poor connection (such as
damaged/pulled-out pins, corrosion).
z
Are there any malfunction?
Yes
Repair or replace suspected part, then go to Step
9.
No
Go to the next Step.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:39 AM
Page 255
© 2005 Mitchell Repair Information Company, LLC.
