DTC B1048, B1925, B1933, B1935, B1938 DIAGNOSTIC PROCEDURE
STEP
INSPECTION
ACTION
1
INSPECT PASSENGER-SIDE AIR BAG
MODULE
z
Using the M-MDS, verify the following
PID/DATA monitor.
(See
PID/DATA MONITOR TABLE
.)
{
RES_AB_P
z
Is the resistance of the passenger-side air bag
module normal?
{
Resistance:
1.0-9.7 ohms
Yes
Replace the SAS control module. (See
SAS CONTROL MODULE
REMOVAL/INSTALLATION
.)
No
Go to the next step.
2
INSPECT PASSENGER-SIDE AIR BAG
MODULE CONNECTOR
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for
1 min or more
.
z
Disconnect the passenger-side air bag module
connector. (See
PASSENGER-SIDE AIR
BAG MODULE
REMOVAL/INSTALLATION
.)
z
Is there any malfunction of the passenger-side
air bag module connector?
WARNING:
z
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
Yes Replace the air bag wiring harness.
No
Go to the next step.
VERIFY WHETHER MALFUNCTION IS IN
PASSENGER-SIDE AIR BAG MODULE OR
RELATED WIRING HARNESS
Yes Go to the next step.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
