Fig. 20: Unlocking Lock Piece Of Selector Cable (Selector Lever Side)
Courtesy of MAZDA MOTORS CORP.
5. Lock the lock piece of the selector cable (selector lever side) in the order shown in the figure.
6. Install the center console.
7. Shift the selector lever from P position to M range, and make sure that there are no other components in
that area to interfere with the lever.
Fig. 21: Locking Lock Piece Of Selector Cable (Selector Lever Side)
Courtesy of MAZDA MOTORS CORP.
SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. To remove the interlock cable, remove the following parts.
1. Column cover (See
COLUMN COVER REMOVAL/INSTALLATION
.)
2. Driver side under panel
3. Accelerator pedal (See
ACCELERATOR PEDAL REMOVAL/INSTALLATION [MZI-3.7]
.)
3. To remove the selector cable, remove the following parts.
1. Battery and battery tray
2. Air cleaner component (See
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-
3.7]
.)
3. Dashboard (See
DASHBOARD REMOVAL/INSTALLATION
.)
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:30:13 AM
Page 10
© 2005 Mitchell Repair Information Company, LLC.
