3. Then, select items from the screen menu in the following order.
1. Select "PATS Function"
4. Select the items to be performed from the following:
z
Program Additional card key
z
Card Key Code Erase and Program
z
Steering Lock Unit Programming
z
Program additional ignition key
z
Ignition Key Code Erase and Program
z
Customer Spare Key Programming Enable
z
Customer Spare Key Programming Disable
z
Parameter Reset
5. The security access begins and the M-MDS displays the "OUT-CODE".
6. Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.
7. If the security access is successful, selected item can be performed.
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION &
CLEARING [ADVANCED KEYLESS SYSTEM]
M-MDS EXECUTION MENU/SEQUENCE FOR THE IMMOBILIZER SYSTEM COMPONENT
PARTS REPLACEMENT
NOTE:
z
When "OUT-CODE" is first displayed, turning the ignition switch from
the LOCK to the ON position 5 times will change the "OUT-CODE".
NOTE:
z
When the component parts of the immobilizer system are replaced, the
menu and execution sequence of the M-MDS vary depending on the type
of the replaced unit and parts. Perform the procedures referring to the
following table.
z
When performing the procedure, follow each procedure. If the procedure is
not followed, the procedure may not be completed correctly.
{
NO.1 ADDITIONAL KEY PROGRAMMING PROCEDURE (USING TWO
VALID KEYS)
{
NO.2 KEY ADDITIONAL PROGRAMMING PROCEDURE (USING THE
M-MDS)
{
NO.3 KEY REPLACEMENT PROCEDURE (CLEARING PREVIOUSLY
PROGRAMMED KEY ID NUMBERS, KEY RE-PROGRAM)
{
NO.4 PCM REPLACEMENT PROCEDURE
{
NO.5 KEY ADDITIONAL PROGRAMMING PROCEDURE CHANGING
{
NO.6 STEERING LOCK UNIT REPLACEMENT PROCEDURE
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 55
© 2005 Mitchell Repair Information Company, LLC.
