DTC B267C [POWER LIFTGATE (PLG) SYSTEM]
DTC B267C - DETECTION CONDITION POSSIBLE CAUSE CHART
z
Is the wiring harness normal?
Go to the next step.
2
VERIFY CORRECTION COMPLETED
z
Reconnect the disconnected connector.
z
Clear the DTC.
z
Operate the PLG system. (Close
operation)
z
Is DTC B267B stored?
Yes
Replace the PLG control module.
(See
POWER LIFTGATE (PLG)
CONTROL MODULE
REMOVAL/INSTALLATION
.)
No
DTC troubleshooting completed.
DTC B267C
Return switch circuit malfunction
DETECTION
CONDITION
The voltage input to the return switch does not change while the PLG system is
operating.
POSSIBLE CAUSE
z
Open circuit in wiring harness between PLG control module terminal 3E and
liftgate latch and lock actuator terminal E
z
Short to power supply in wiring harness between PLG control module terminal
3E and liftgate latch and lock actuator terminal E
z
Short to GND in wiring harness between PLG control module terminal 3E and
liftgate latch and lock actuator terminal E
z
Open circuit in wiring harness between liftgate latch and lock actuator terminal C
and body GND
z
Return switch malfunction
z
PLG control module malfunction
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES On-Board Diagnostic (Power Liftgate (PLG) System) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:46:08 AM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
