M-MDS CONNECTING PROCEDURE
1. Fully lower the door glass.
2. Connect the M-MDS to the DLC-2.
3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
NO.1 ADDITIONAL KEY PROGRAMMING PROCEDURE (USING TWO VALID KEYS)
starting the engine using the next key.
z
If the engine cannot be started using a programmed key, repeat the
procedure from the beginning.
z
Do not start the engine unless indicated in the procedure. If the engine is
started during the programming procedure, programming is stopped at
that point. Repeat the procedure starting from the beginning if the engine
is started before completion.
z
Do not place the card key in the vehicle or bring it
within approx. 1 m
of
the vehicle unless indicated in the procedure.
z
Two or more key ID numbers must be programmed for the engine to start.
z
A maximum of eight key ID numbers can be programmed for one vehicle.
The M-MDS can be used to verify the number of key ID numbers
programmed to a single vehicle.
z
Do not select a M-MDS screen menu other than one indicated in the
procedure.
CAUTION:
z
Do not place the M-MDS in the vehicle while programming, otherwise
programming cannot be performed.
CAUTION:
z
Protect the cable and body contact area with a clean rag,
otherwise they could be damaged.
Fig. 85: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 60
© 2005 Mitchell Repair Information Company, LLC.
