1. Clean the rear wiper arm connector shaft using a wire brush before installing the rear wiper arm.
Fig. 28: Cleaning Rear Wiper Arm Connector Shaft Using Wire Brush
Courtesy of MAZDA MOTORS CORP.
REAR WIPER ARM AND BLADE ADJUSTMENT
1. Turn off the rear wiper switch while operating the rear wiper motor, and then stop the rear wiper at the
auto-stop position.
2. Set the rear wiper arm onto the ceramic end line.
Fig. 29: Identifying Rear Wiper Arm And Blade Adjusting Dimension
Courtesy of MAZDA MOTORS CORP.
REAR WIPER MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Rear wiper arm and blade (See
REAR WIPER ARM AND BLADE
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Wiper/Washer System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:35:20 AM
Page 19
© 2005 Mitchell Repair Information Company, LLC.
