Fig. 22: Inspection & Repair Procedure Diagram
Courtesy of MAZDA MOTORS CORP.
Lateral runout inspection
1. To secure the disc plate and the hub, tighten the hub nuts upside down or insert a washer (thickness
10
mm {0.39 in}
with an inner diameter
more than 12 mm {0.47 in})
between the hub bolt and the hub nut.
2. After tightening all the hub nuts to the same torque, put the dial gauge on the friction surface of disc plate
10 mm {0.39 in}
from the disc plate edge.
3. Rotate the disc plate one time and measure the runout.
Front disc plate runout limit 0.05 mm {0.002 in}
Thickness variation inspection
1. Clean the disc plate-to-pad friction surface using a brake cleaner.
NOTE:
z
The component parts of the
SST
(49 B017 001 or 49 G019 003) can be
used as a suitable washer.
2008 Mazda CX-9 Grand Touring
2008 BRAKES Conventional Brake System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:48:49 AM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
