Fig. 231: Inspecting Planetary Gear
Courtesy of MAZDA MOTORS CORP.
18. Install the VSS and spacer to the counter drive gear.
Tightening torque 3.9 - 6.9 N.m {40 - 70 kgf.cm, 26 - 60 in.lbf}
19. Apply ATF to the spline on the counter drive gear and spline on the ring gear.
Fig. 232: Identifying VSS And Spacer Of Counter Drive Gear
Courtesy of MAZDA MOTORS CORP.
20. Install the counter drive gear to the transaxle case.
21. Install the new lockwashers and washers with new bolts.
Tightening torque 82.7 - 93.6 N.m {8.5 - 9.5 kgf.cm, 61.0 - 69.0 ft.lbf}
Bolt length (measured from below the head)
CAUTION:
z
Do not damage the VSS wiring harness.
z
Do not pull hard on the VSS wiring harness.
NOTE:
z
Verify that the claws of the lockwashers are facing upward.
2008 Mazda CX-9 Grand Touring
2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Microsoft
Sunday, November 15, 2009 10:28:17 AM
Page 128
© 2005 Mitchell Repair Information Company, LLC.
