DIFFERENTIAL OIL TEMPERATURE SENSOR INSPECTION
1. Disconnect the negative battery cable.
2. Disconnect the differential oil temperature sensor connector and remove the differential oil temperature
sensor.
3. Wrap the differential oil temperature sensor with plastic wrap and immerse it into a beaker filled with
water. Gradually raise the water temperature, and measure resistance between differential oil temperature
sensor terminals A and B.
z
If not as specified, inspect the harness for continuity. If there is normal continuity between the
terminals, replace the differential oil temperature sensor.
Fig. 26: Inspecting Differential Oil Temperature Sensor
Courtesy of MAZDA MOTORS CORP.
Differential oil temperature sensor specification
RESISTANCE SPECIFICATION
4. Install the differential oil temperature sensor and connect the connector.
5. Connect the negative battery cable.
WARNING:
z
Hot differential oil may cause severe burns. Do not perform
maintenance while differential oil is hot.
Water temperature (°C {°F}) Resistance (kirohm)
0 {32}
91-100
10 {50}
56-61
20 {68}
35-39
30 {86}
23-25
40 {104}
14-17
50 {122}
10-11
60 {140}
7.1-7.9
70 {158}
5.0-5.6
80 {176}
3.6-4.0
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE All Wheel Drive (AWD) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:31:22 AM
Page 17
© 2005 Mitchell Repair Information Company, LLC.