1. Select "Module Tests".
2. Select "PCM".
3. Select "DataLogger".
Fig. 11: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
3. Select the simulation items from the PID table.
4. Perform the simulation function, inspect the operations for each parts.
z
If there is no operation sound from the relay, motor, and solenoid after the simulation function
inspection is performed, it is possible that there is an open or short circuit in the wiring harness,
relay, motor or solenoid, or sticking and operation malfunction.
AFTER REPAIR PROCEDURE [MZI-3.7]
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "PCM".
4. Select "Retrieve CMDTCs".
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:34 AM
Page 13
© 2005 Mitchell Repair Information Company, LLC.
