Fig. 6: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
3. Select the active command modes from the PID table.
4. Perform the active command modes, inspect the operations for each parts.
z
If the operation of output parts cannot be verified after the active command mode inspection is
performed, this could indicate the possibility of an open or short circuit, sticking, or operation
malfunction in the output parts.
FREEZE FRAME PID DATA ACCESS PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
This function is available for only the IDS (laptop PC)
1. Select the "Body" tab.
2. Select "TPMS Functions".
Fig. 7: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
3. Select "Freeze Frame Data".
DTC TABLE
2008 Mazda CX-9 Grand Touring
2008 SUSPENSION On-Board Diagnostic (Suspension) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:25:36 AM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
