8. Cut away the old sealant using a razor or scraper so that
1-2 mm {0.04-0.07 in}
thickness of sealant
remains along the perimeter of the frame.
9. If the sealant has come off completely in any one place, apply some primer after degreasing, and allow it
approx. 30 min
to dry. Then apply
2 mm {0.08 in}
thickness of new sealant.
10. Clean and degrease along the perimeter of the bonding area on the body.
Fig. 36: Cutting Old Sealant With Razor
Courtesy of MAZDA MOTORS CORP.
11. Apply body primer on the body as shown in the figure, then allow it to dry for
approx. 30 min.
Courtesy of MAZDA MOTORS CORP.
CAUTION:
z
To prevent weakening of the primer adhesion, keep the bonding
surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
CAUTION:
z
To prevent weakening of the primer adhesion, keep the bonding
surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
NOTE:
z
Apply primer to the hollowed marks in the ceramic coating.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 27
© 2005 Mitchell Repair Information Company, LLC.
