Fig. 24: Pressing Mounting Rubber Out From Gear Housing Using SSTs And Press
Courtesy of MAZDA MOTORS CORP.
STEERING GEAR AND LINKAGE INSPECTION
RACK INSPECTION
1. Inspect the rack for cracking, damage, and tooth wear. Replace it if necessary.
2. Measure the runout of the rack.
Steering rack runout
Near point A: 0.15 mm {0.006 in} max.
Near point B: 0.20 mm {0.008 in} max.
3. If not within the specification, replace the rack.
Fig. 25: Measuring Runout Of Rack
Courtesy of MAZDA MOTORS CORP.
TIE-ROD END INSPECTION
1. Inspect the tie-rod end for damage and boot cracks. Replace it if necessary.
2. Inspect the ball joint for looseness. Replace the tie-rod end if necessary.
2008 Mazda CX-9 Grand Touring
2008 STEERING Power Steering - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:20:34 AM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
