Fig. 92: Steering Lock Unit Replacement Procedure
Courtesy of MAZDA MOTORS CORP.
1. Prepare two or more keys to be programmed after the key ID number is cleared.
2. Connect the M-MDS to the DLC-2. (See
M-MDS MENU
.)
3. Using key 1, turn the ignition switch to the ON position.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
5. Then, select items from the screen menu in the following order.
z
Select "PATS Functions".
6. Select "Ignition Key Code Erase" from the M-MDS screen menu and perform the procedure according to
the M-MDS screen
7. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE
.)
8. Perform the steering lock unit programming. (See
STEERING LOCK UNIT ID CODE
REGISTRATION [ADVANCED KEYLESS SYSTEM]
.)
9. After verifying that the PATS function menu is displayed again on the M-MDS screen, select "Exit (From
This Menu)" to finish the M-MDS procedure.
10. After Step 9, wait
5 s or more
and then turn the ignition switch to the ON position.
11. Ignition switch to the LOCK position.
12. Disconnect the M-MDS from the DLC-2.
13. Using key 1, turn the ignition switch to the ON position.
14. After verifying that the security light and keyless warning light illuminate
for 3 s or more
, turn the
ignition switch to the LOCK position and remove key 1.
NOTE:
z
Although the security light remains illuminated and DTC 23 is
displayed after approx. 1 min, this does not indicate an improper
procedure. Continue to perform the procedure as indicated.
CAUTION:
z
The M-MDS displays "You must now program a minimum of two
keys.", however, do not perform the key programming and
proceed to Step 7. If the procedure is not followed, the engine
may not be started. The key programming procedure is
performed at Steps 13 to 18.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 71
© 2005 Mitchell Repair Information Company, LLC.