AND STEERING LOCK UNIT) ARE REPLACED AT THE SAME TIME
Condition
z
The menu executed on the M-MDS varies depending on the replaced parts. Verify the M-MDS menu to
be executed referring to the
M-MDS EXECUTION MENU/SEQUENCE FOR THE IMMOBILIZER
SYSTEM COMPONENT PARTS REPLACEMENT
.
Procedure
Fig. 96: Procedure For - PCM, Keyless Control Module & Steering Lock Unit
Courtesy of MAZDA MOTORS CORP.
1. Prepare two or more keys to be programmed after the key ID number is cleared.
2. Connect the M-MDS to the DLC-2. (See
M-MDS MENU
.)
3. Using key 1, turn the ignition switch to the ON position.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
CAUTION:
z
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed:
{
Card key
{
M-MDS
{
Personal computer
{
Devices that can send/receive the radio waves
NOTE:
z
Although the security light starts flashing and DTC 15 or DTC 23 is
displayed after approx. 1 min, this does not indicate an improper
procedure. Continue to perform the procedure as indicated.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 77
© 2005 Mitchell Repair Information Company, LLC.
