2. Press tab A in the direction of the arrow and remove it.
3. While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the front
sash molding from the body.
4. Rotate the front sash molding at the pivot of tab B in the direction of arrow D and remove it.
5. Remove the tab C.
6. Remove the front sash molding.
Fig. 31: Identifying Front Sash Molding With Tab
Courtesy of MAZDA MOTORS CORP.
DOOR SASH FILM REMOVAL
1. Partially peel back the glass run channel.
2. Partially peel back the door weatherstrip.
3. Remove the following parts:
1. Inner garnish (See
INNER GARNISH REMOVAL/INSTALLATION
.)
2. Front door trim (See
FRONT DOOR TRIM REMOVAL/INSTALLATION
.)
3. Inner sail garnish (See
INNER SAIL GARNISH REMOVAL/INSTALLATION
.)
4. Rear door trim (See
REAR DOOR TRIM REMOVAL/INSTALLATION
.)
5. Front beltline molding (See
FRONT BELTLINE MOLDING REMOVAL/INSTALLATION
.)
6. Rear beltline molding (See
REAR BELTLINE MOLDING REMOVAL/INSTALLATION
.)
7. Front sash molding (See
FRONT SASH MOLDING REMOVAL
.)
8. Rear sash molding (See
REAR SASH MOLDING REMOVAL
.)
9. Rear door garnish (See
REAR DOOR GARNISH REMOVAL/INSTALLATION
.)
4. Peel off the rear sash film by pulling it outward from one end.
NOTE:
z
Slowly remove the door sash film since it may tear easily.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:44:03 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
