1. Install the right rear shaft of the
SST
to the bolt of the right shock absorber shown in the figure.
2. Install the left rear shaft of the
SST
to the bolt of the left shock absorber (Identical position to the
right side).
Fig. 64: View Of Right Rear Shaft Of SST
Courtesy of MAZDA MOTORS CORP.
3. Install the left/right front shaft of the SST with front foot No.2 to the bolt shown in the figure.
4. Adjust the positions of the SST side bars so that they are the same height (left and right) and
horizontal.
5. Make sure each joint is securely tightened.
Fig. 65: View Of Left/Right Front Shaft Of SST
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:29:31 AM
Page 55
© 2005 Mitchell Repair Information Company, LLC.
