2. Select "IC".
3. Select "Self Test".
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Verify that no DTCs are displayed.
Fig. 4: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
PID/DATA MONITOR AND RECORD PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "IC".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "IC".
3. Select "DataLogger".
3. Select the applicable PID from the PID table.
4. Verify the PID data according to the directions on the screen.
2008 Mazda CX-9 Grand Touring
2008 SUSPENSION On-Board Diagnostic (Suspension) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:25:36 AM
Page 4
© 2005 Mitchell Repair Information Company, LLC.
