Check code 07
CHECK CODE INSPECTION CHART (CHECK CODE 07)
STEP
CONDITION
DISPLAY
ACTION
1
Turn the ignition switch
to the ON position.
Go to the next step.
Verify that the voltage of information
display terminal E is
B+.
z
If the voltage is as specified, replace
the information display.
z
If the voltage is not as specified,
inspect the following parts:
{
Ignition switch
{
Wiring harness (Battery-
ignition switch-information
display)
2
Turn the ignition switch
off.
Verify that the voltage of the information
display terminal E is
1.0 V or less.
z
If the voltage is as specified, replace
the information display.
z
If the voltage is not as specified,
inspect the following parts:
{
Ignition switch
{
Wiring harness (Battery-
ignition switch-information
display)
Input signal to the information display is
normal.
Check code 07
Dimmer cancel switch ON/OFF signal
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 28
© 2005 Mitchell Repair Information Company, LLC.
