LG-Ericsson iPECS eMG100 Programming Manual Download

Page: 317 / 718

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual

Issue 2.3

300

Table 4.4.2.17-1 STATION VM ATTRIBUTES

ATTRIBUTE

DESCRIPTION

RANGE

DEFAULT

Cascade Mailbox 5

A left message is copied or moved to 5

’th mailbox

destination station.

Station No N/A

Cascade Method

Cascade method is determined.

Disable, Copy, Move

Refer to

description

Disable

Cascade Message

Type

Cascade Message Type is determined.

Normal Only, Urgent Only, All

Refer to

description

Normal only

Cascade Apply Timer Cascade Apply Timer is set.

001 ~250

(min)

Cascade For Read

Message

If this value is set to Enable, the left message can be

cascaded to next destination regardless the message is

read or not.

If this value is set to Disable, cascading action is stopped

when the left message is read.

0 : Disable

1 : Enable

Enable

E-Mail notification

[Send Mail] button : click [Send mail] button to send mail for notification

E-Mail Notification

Enable

If this option is set ON, the system sends Email as soon as

getting Voice mail.

OFF

SMTP Server

Address (IP or

Domain Name)

This field defines the address or URL of the SMTP mail

server for the notification.

IP v4 addressor Mail server name

Refer to

description

Max. 64

characters

SMTP Port

This field defines the TCP/IP port the system will employ

when communicating with the SMTP E-mail server.

1 - 65535

SMTP Security

Connection

The system can support basic security policies when

communicating with the SMTP E-mail server. Note the

server must also be configured for the selected security

protocol.

No Security, SSL, TLS

Refer to

description

No Security

E-Mail Account ID

This field defines the account Identification for the system

configured in the SMTP server.

E-Mail Account

Password

This field defines the password for the system’s E-mail

account in the SMTP server.

Max. 64

characters

Sender E-Mail

Address (From)

This field defines the E-mail address used to send the new

Voice Message notification via E-mail.

E-mail

address

Receiver E-Mail

Address (To)

This field defines the E-mail address to notify when a new

VSF message is received for the station.

E-mail

address

Attach Message

Option

When E-mail notification is enabled in the VM COS (PGM

253), the E-mail may include the voice mail as a wav file

attachment. The proper information must be assigned for

the receiver mail and system mail account information.

OFF

Delete Message

Option

After sending an E-mail notification the system will
automatically delete the Voice message from the user’s

Voice Mailbox if this parameter is ON.

OFF

Summary of Contents for iPECS eMG100















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS eMG100

Reviews:

Related manuals for iPECS eMG100

Brands by name

Popular brands

LG-Ericsson iPECS eMG100, Programming Manual

Search results

Summary of Contents for iPECS eMG100

Reviews:

Related manuals for iPECS eMG100

Brands by name

Popular brands