iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
272
4.4.2.3
Terminal Attributes - PGM 112
Selecting Terminal Attributes will display the Terminal Attributes data input page. Enter a valid station range
and click
[Load]
to enter Terminal Attributes data. Use the check boxes to indicate which attributes to define;
data for checked attributes is stored for the entire range of stations by clicking
[Save]
Button after changing
Value.
Figure 4.4.2.3-1 Terminal Attributes (PGM 112)
Terminal Attributes define features and functions available to the terminal itself. Generally, the entry will turn
the feature ON (enable) or OFF (disable). Refer to the following table for a description of the features and the
input required.
Table 4.4.2.3-1Terminal Attributes
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Auto Speak
Selection
Enables
[SPEAKER]
activation when a CO/IP Line, DSS orother
feature button is pressed;there is no need to lifthandset.
OFF
ON
ON
No-Touch Answer
Enables No-touch answer, which automaticallyconnects
transferred calls to the station’sspeakerphone after a short tone.
OFF
ON
OFF
ICM signaling
Mode
The user may select Hands-free (H), Privacy (P) or Tone Ring (T)
for the ICM Signaling mode.
H,
T,
P
T
Headset Ring
The user can select how to receive Incoming ring signals
amongSpeaker, Headset or Both.
Speaker/
Headset/
Both
Speaker
Speaker/Headset The user can select between Speaker and Headset for Call.
Speaker/
Headset/
Speaker
