iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
620
1)
Click the Add Function button.
2)
On the below window, click the desired PGM in the left frame. First fill out the function name and
step name. To configure the step 1, click the Make table to check the desired function and then
click the Save button.
Check All: check all functions
Save: Save the checked functions
Initialize: Initialize the checked functions
3)
The selected functions are displayed and click the Save button after checking each functions. The
rest steps are the same as the step 1.
