iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
234
4)
Finally, click
[Save]
Function to save and then click
[OK]
button.
5)
To check the function, click Function Base button in the left frame and User Function List and you
will see the following figure.
You can enable or disable the function by checking each function and then click the save after
setting Value. Also move to each step by clicking
[Next]
button or
[Previous]
button.
Deleting Function
To delete the user function, click Maintenance at the top of window and then click the Function Program ->
User Function Management. Check the desired function to delete and click
[Delete]
button.
