iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
382
4.4.5.18 LED Flashing Rate - PGM 170
Selecting LED Flashing Rate will display the data entry page.Click
[Save]
button after changing Value.
Figure 4.4.5.18-1 LED Flashing Rate
The LED flash rate for various functions and states can be assigned any one of the system‘s 15 signals. The
various functions and states are shown in the following table. The 15 flash signals available in the system are
shown in the table ‘LED flash rate’.
Table 4.4.5.18-1 LED INDICATION
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
CO Incoming Ring
CO button Incoming ring flashing rate. 00-14
FLASH 30
IPM(2)
CO Transfer Ring
CO button transfer ring flashing rate.
00-14
FLASH 120
IPM(10)
COL Queue Ring
CO button queue call back ring
flashing rate.
00-14
FLASH 240
IPMFLUTTER(6)
COL RCL Ring
CO button recall ring flashing rate.
00-14
FLASH 480
IPMFLUTTER(8)
COL I Hold Ring
CO button I hold flashing rate.
00-14
FLASH 30
IPM WINK(12)
COL System Hold
Ring
CO button system hold flashing rate.
00-14
FLASH 60
IPM(3)
COL Exclusive Hold
Ring
CO button exclusives hold flashing
rate.
00-14
FLASH 120
IPM(10)
COL Outgoing
Disabled
CO button outgoing disabled flashing
rate.
00-14
FLASH 240
IPMFLUTTER(6)
COL Incoming Off-net
CFW
CO button incoming off-net call
forward flashing rate.
00-14
FLASH 240
IPMFLUTTER(6)
COL DISA Indication
CO button DISA indication flashing
rate.
00-14
FLASH 240
IPM(5)