LG-Ericsson iPECS eMG100 Programming Manual Download

Page: 4 / 718

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual

Issue 2.3

- Alarm display is added in PGM 335.

- Firewall IP is added in PGM 441.

- MS Excel-like table data management is to be extended.

- User Greeting is added to Maintenance.

- Company Directory is added to Maintenance.

- Web Certificate is added to Maintenance.

- Custom 1 and Custom 2 are added in Web Access Authorization and User

management.

- Line Echo added to SLT attributes in PGM 112.

- DSS in use added to LED Flashing Rates in PGM 170.

1.7

Nov, 2016

S/W version 2.2.x.

- The search box is enhanced by adding Attribute search and highlighting the

result.

- The virtual registration is available up to 25 devices at one time and can

copy/paste/drag like excel.

‘DSS LED service’ for indicating the other station status is added in PGM 111.

‘Collect call block’ is added in PGM 111.

‘Add 1st CO Group Access Code in Call log’ is added in PGM 113.

- Call Log Attribute is added in PGM 113.

‘Dial Digit’ is added as the flexible button type in PGM 115/129.

- The checkbox is added in PGM 117, PGM 118, and PGM 119.

- The call forward type in PGM 120 is updated; changed Unconditional to Internal

Unconditional and added External Unconditional.

- Station ICR Scenario (PGM 1201) is updated about Call Profile Usage, Call

Profile Timer, and Call Profile Apply Option.

- Station CLI Program is added to Station Data.

- CID/CPN Attributes (PGM 151) added.

- Alarm Receiver E-Mail Address (To) & Notification E-Mail Address (To) is

updated in PGM 160~161.

- Resource Monitoring is added in PGM 160~161.

‘Display Forward Reason’ is added in PGM 160~161.

‘CCR No Digit Error Timer’ is added in PGM 180~182, 186.

- Net Station as CO Type is added in System Speed Dial.

- LIP-9050S and LIP-9071S are added to CONF TYPE in PGM 212.

‘Changed CLI’ is added in PGM 270.

‘Register LM Device directly’ is added in PGM 331.

‘Use Firewall IP’ is added in PGM 441.

1.8

Jan, 2018

S/W version 3.0.x.

- virtualized UCP

- Mitel PMS Interface

- User Base License

- Multi-login support

- Push service for iOS/Android mobile

- Automatic failover for UCS Premium

- Automatic failover for LIP-9000 (IPKTS)

- Multi-zone for WTIM4/8 and WTIM24

Summary of Contents for iPECS eMG100















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS eMG100

Reviews:

Related manuals for iPECS eMG100

Brands by name

Popular brands

LG-Ericsson iPECS eMG100, Programming Manual

Search results

Summary of Contents for iPECS eMG100

Reviews:

Related manuals for iPECS eMG100

Brands by name

Popular brands